2 Way Solenoid Valves Manufacturers and Supplier
FEATURES :
- COMPACT REGID MODELS SUITABLE FOR INSTALLATION IN EQUIPMENTS AS WELL AS FOR OPEN ENVIROMENT
- RAW MATERIAL USED IS GRADED ALUMINUM , BRASS , & STAINLESS STEEL OF PREMIUM QUAL
- ALUMINUM IS PROCESSED WITH ANODIZED COATING OF 40 TO 50 RC FOR ADDED PROTECTION
- SOLENOID COILS ARE MANUFACTURED WITH PREMIMUM QUALITY DUAL CORE COPPER WIRE SUITABLE FOR HIGHER TEMPRATURES & WILL ALSO PROTECT COILS FROM BURNING OR FAILURE DUE TO VOLTAGE FLCTUATIONS IF ANY.
SPECIFICATIONS :
- THESE VALVES ARE DIRECT ACTING TYPE OF SOLENOID VALVES WHICH DOES NOT REQUIRED ANY EXTERNAL PILOT PRESSURE TO OPERATE THE VALVE.
- PORT CONNECTIONS : 1/ 4 & 1 /2 BSP ( F ) / NPT ( F )
- VALVES ARE AVALIABLE FROM PRESSURE RANGE OF 0 TO 100 BAR
- ORIFICE AVALIABLE FROM 1 MM TO 4 MM
- THEY ARE AVALIABLE IN OPTIONS OF
- NORMALLY CLOSED ( NC ) ENERGIZED TO OPEN TYPE AND
- NORMALLY OPEN ( NO ) ENERGIZED TO CLOSE TYPE
- MOC OF VALVE BODY CAN BE ALUMINUM / BRASS / SS 304 & SS 316
- SEALS CAN BE NBR / VITION / SILICON AS PER APPLICATION
- SOLENOID COILS AVALIABLE ARE OF TYPE SIZE I & SIZE II
- SOLENOID ENCLOSURES ARE AVALIABLE
- WITH WEATHERPROOF PROTECTION &
- FLAMEPROOF PROTECTION SUITABLE FOR GR I , II A & II B
- COIL SUPPLY VOLTAGES : 24 V / 110 V / 240 V AC / DC
- COIL CONNECTIONS :
- WITH FLYING LEADS
- WITH PLUG IN TYPE 3 PIN CONNECTOR (PG 9 )
WORKING MEDIA :
- AIR / WATER / GAS / STEAM / VACUUM / KEROSIN / OIL ETC
AREA OF APPLICATION :
-
WELDING MACHINES / POWDER COATING MACHINES , GAS ANALYSER EQUIPMENTS, VARIOUS TESTING EQUIPEMENTS, FILLING APPLICATIONS, AIR CARE EQUIPMENTS & MANY MORE.
-
VALCO MAKE 2 WAY DIAPHRAGM OPERATED SOLENOID VALVES ARE WIDELY PREFERRED FOR HIGH FLOW HIGH ORIFICE APPLICATION REQUIREMENTS.
2/2 WAY WHICH STANDS FOR 2 PORTS (INLET & OUTLET) & 2 POSITIONS (OPEN & CLOSE)
FEATURES :
- COMPACT REGID MODELS SUITABLE FOR INSTALLATION IN EQUIPMENTS AS WELL AS FOR OPEN ENVIROMENT.
- RAW MATERIAL USED IS GRADED ALUMINUM , BRASS OF PREMIUM QUALITY
- SOLENOID COILS ARE MANUFACTURED WITH PREMIMUM QUALITY DUAL CORE COPPER WIRE SUITABLE FOR HIGHER TEMPRATURES & WILL ALSO PROTECT COILS FROM BURNING OR FAILURE DUE TO VOLTAGE FLCTUATIONS IF ANY .
SPECIFICATIONS :
- THESE VALVES ARE DIAPHRAGM OPERATED TYPE OF SOLENOID VALVES WHICH OFFERS HIGH FLOW & HIGHER ORIFICE COMPAIRED TO DIRECT ACTING VALVES .
- PORT CONNECTIONS : 1/ 4 & 1 BSP ( F ) / NPT ( F )
- VALVES ARE AVALIABLE FROM PRESSURE RANGE OF 0.5 TO 10 BAR
- FULL ORIFICE OFFERED TO THE REQUIRED PROCESS CONNECTIONS
- THEY ARE AVALIABLE IN OPTIONS OF
- NORMALLY CLOSED (NC) ENERGIZED TO OPEN TYPE AND
- NORMALLY OPEN (NO) ENERGIZED TO CLOSE TYPE
- MOC OF VALVE BODY CAN BE ALUMINUM & BRASS
- SEALS CAN BE NBR / VITION AS PER APPLICATION
- SOLENOID ENCLOSURES ARE AVALIABLE
- WITH WEATHERPROOF PROTECTION &
- FLAMEPROOF PROTECTION SUITABLE FOR GR I , II A & II B
- COIL SUPPLY VOLTAGES
- 24 V / 110 V / 240 V AC/ DC
- COIL CONNECTIONS
- WITH FLYING LEADS
- WITH PLUG IN TYPE 3 PIN CONNECTOR (PG 9 )
WORKING MEDIA :
- AIR / WATER / GAS / STEAM / VACUUM / KEROSIN / OIL ETC
AREA OF APPLICATION :
-
POWDER COATING MACHINES , GAS ANALYSER EQUIPMENTS, VARIOUS
TESTING EQUIPEMENTS, FILLING APPLICATIONS, AIR CARE EQUIPMENTS & MANY MORE
OUR 'VALCO' RANGE OF Y TYPE ANGLE VALVES ARE BEST SOLUTION FOR ON-OFF PNEUMATIC CONTROL APPLICATION FOR MEDIA LIKE AIR / WATER / STEAM / OIL ETC
THESE ARE PNEUMATICALLY OPERATED VALVES AND REQUIRED EXTERNAL AIR PRESSURE TO OPERATE THIS VALVE.
General specifications:
- INVESTMENT CASTED BODY.
- ACTUATOR OF THIS VALVE IS PNEUMATIC CYLINDER TYPE WITH PRESSED STAINLESS STEEL.
- TYPES: 2 way & 3 way
- SIZE RANGE: 1/2" to 3"
- AVAILABLE IN SCREWED / FLANGED ENDS CONNECTIONS.
Area of uses :
- "Y" TYPE (ANGLED) PNEUMATIC VALVES ARE USED FOR PROCESS CONTROL APPLICATION.
- THESE VALVES ARE USED FOR ON-OFF APPLICATION TO CONTROL STEAM, WATER, COOLANTS, AIR, GAS, AND LIGHT OIL AT LINE PRESSURE UP TO 10 BAR
AREA OF APPLICATION :
USED IN TEXTILE DYEING MACHINERY, TEXTILE DYEING MILLS, AIR-DRYING EQUIPMENT'S, AUTOCLAVES, PHARMACEUTICAL MACHINERY, AUTOMOBILE INDUSTRY AND AUTOMATIC PROCESS CONTROL APPLICATIONS.
Mumbai | Thane | Bhiwandi | Raigad | Pune | Nashik | Maharashtra | Aurangabad | Ahmednagar | Akola | Amravati | Bed | Bhandara | Buldhana | Chandrapur | Dhule | Gadchiroli | Gondia | Hingoli | Jalgaon | Jalna | Kolhapur | Latur | Nagpur | Nanded | Nandurbar | Osmanabad | Parbhani | Ratnagiri | Sangli | Satara | Sindhudurg | Solapur | Washim | Yavatmal | Pimpri Chinchwad | Assam | Gujarat | Ahmedabad | Sikkim | West Bengal | Goa | Roha | Odisha | Madhya Pradesh | Andaman and Nicobar | Chiplun | Khed | Mangoan |